Mallet vs blade putter covers: how to find the cover that fits your putter

Mallet vs blade putter covers: how to find the cover that fits your putter

Updated

A blade putter takes a blade cover. A mallet putter takes a mallet cover, and which mallet cover depends on where the shaft enters the head. Check the head shape first, then the shaft position, then the model name.

Head shape gets you to the right part of Winston Collection's putter covers. Shaft position decides the cover. Putter covers aren't one-size-fits-all: different shaft positions need different models, so check yours before you pick a color.

Mallet vs blade putter covers: which one do you need?

A blade cover fits the narrow head of a blade putter. A mallet cover is cut for the wider, deeper head of a mallet.


Blade putter cover

Mallet putter cover (Universal position)

Head shape

Narrow blade head

Wider head with more mass behind the face

What decides the fit

Head shape

Head shape and shaft position

Example in Tradition Leather

Blade Putter Headcover in Tradition Leather

Mallet Putter Cover in Tradition Leather (Universal position, for heel shafted putters; see below)

Listed dimensions

6" H, 3" Toe Width, 7" Heel to Toe

5.25" x 4.75"

Closure

Dual heavy-duty magnetic closure

Magnetic closure

Lining

Polar Fleece MacKenzie Plaid

Polar Fleece in black or MacKenzie Plaid


If you putt with a blade, the Blade Putter Headcover in Tradition Leather is the place to start. Compare its listed dimensions with your putter head before you order.

If you putt with a mallet, keep reading. On a mallet, the shaft can enter the head in more than one place, and each position takes a different cover.

How do you find the right mallet putter cover?

Look at where the shaft meets the head. That position decides the cover.

  1. Find your shaft position. Look down at the putter from address. Note whether the shaft enters at the heel, at the center of the face edge, or behind the face.

  2. Match the position to a cover type. Use the fit chart below, which also appears on every mallet putter cover listing.

  3. Confirm the model. Read the model name on your putter. For center shaft covers, check it against the compatibility line on the product page.

  4. Check the dimensions. Each cover featured here lists its dimensions on the product page. Compare them with your putter head.

  5. Then choose the leather and color.

[Image: Winston mallet putter cover fit chart, clean version without X's (Putters.zip, sent by Pete Line Oct 27). Alt text: "Winston mallet putter cover fit chart showing four shaft positions: Universal, Center Shaft, Set-Back and Oversized Set-Back."]

The fit chart names four shaft positions. Here is how each one maps to a cover:

  • Universal: for heel shafted putters, where the shaft enters the head at the heel. Cover: Mallet Putter Cover in Tradition Leather.

  • Center Shaft: for center shafted putters with the shaft centered at the front edge of the putter face. Cover: Standard Center Shaft Putter Headcover.

  • Set-Back: for center shafted putters with the shaft centered behind the edge of the putter face. Cover: Set Back Center Shaft MZ Putter Headcover.

  • Oversized Set-Back: the oversized version of the Set-Back position. Cover: Set Back Center Shaft Oversize DF Putter Headcover.

For more detail on the three center shaft positions, read the center shafted putter cover fit guide.

Not sure after checking? Call Winston Collection at 800.755.1784 before you order. Have your putter's brand, model name and shaft position ready.

Which mallet putter cover fits a center shafted putter?

Center shafted mallets need one of three cover types. Each listing says what it fits.

Standard Center Shaft Putter Headcover

The Standard Center Shaft Putter Headcover in Tradition Leather is for the Center Shaft position.

  • Fit: compatible with most standard center shaft mallets

  • Dimensions: 5.25" x 4.75"

The listing says most, not all. Compare your putter head with the dimensions before you order.

Set Back Center Shaft MZ Putter Headcover

The Set Back Center Shaft MZ Putter Headcover in Tradition Leather is for the Set-Back position.

  • Fit: compatible with Lab MEZZ.1, Lab MEZZ.1 MAX, OZ1

  • Dimensions: 5.25" x 5"

Set Back Center Shaft Oversize DF Putter Headcover

The Set Back Center Shaft Oversize DF Putter Headcover in Tradition Leather is for the Oversized Set-Back position.

  • Fit: compatible with Lab DF2.1 & DF3

  • Dimensions: 6.25" x 5.50"

The MZ and Oversize DF covers both serve Set-Back putters, but their model lists do not overlap. A putter that looks similar to a listed model is not automatically a fit. Match the model name.

All three covers carry the same build:

  • Made with Tradition Leather - 100% Genuine leather that will retain its look over prolonged use

  • Safe, Secure and Stylish - a powerful magnetic closure so the cover stays put in your bag, keeping your clubs scratch-free

  • Fully Lined - Inside is a Polar Fleece MacKenzie Plaid lining, an iconic plaid representing the tradition of the game

  • Handcrafted in the USA - Built to perform with premium materials and a focus on lasting quality

What should you look for in a mallet putter cover?

Fit comes first. Once you have the right cover type, compare the leather, the lining and the color.

Leather

Mallet and blade covers come in several leathers, including Tradition Leather, Premium Pull-Up Leather and Italian Torino Leather. Each leather is its own listing in the putter covers collection, with its own colors.

Lining and closure

Every cover featured here has a magnetic closure. Many Winston Collection putter covers are lined in Polar Fleece MacKenzie Plaid; some mallet covers offer Polar Fleece in black. Check the product page for the lining on the cover you want.

Color

Colorways vary by cover. Pick the color after you have confirmed the fit, not before.

How do you choose a putter cover from Winston Collection?

Find your head shape. Find your shaft position on the fit chart. Confirm the model on the product page. Then pick the leather and color.

Shop putter covers

Frequently asked questions

How do I clean a leather putter cover?

Follow the care line for your leather. Clean traditional leather with warm water and mild soap. For Pull-Up leather, condition it yearly with products labeled for pull-up, oiled, or wax leather. The FAQ page lists care for Traditional, Pull-Up, and Crazy Horse leather.

Is a leather putter cover a good golf gift?

It can be, if you know the putter. A putter cover only works if it fits, so find out the putter's head shape and shaft position in the recipient's bag before you buy.

Can I match my putter cover to my other headcovers?

Yes. Winston Collection makes headcovers for driver, fairway, and hybrid in many of the same leathers as its putter covers. Browse the golf headcovers to build a matching set.

Where are Winston Collection putter covers made?

Winston Collection putter covers are handcrafted in the USA, in Rochester Hills, MI and Miami, FL. The leathers and fabrics are imported.

What should I do if my putter cover is defective?

For defective products, contact Winston Collection within 7 days of delivery. Call 800.755.1784 or use the contact page.

 

Back to blog